The European Union is negotiating an extension of the Carbon Border Adjustment Mechanism (CBAM) to downstream steel and aluminium goods, such as machinery parts, fasteners, tubes, vehicle components and household appliances, together with tighter anti-circumvention rules. The Commission's proposal of 17 December 2025 would apply the extension from 1 January 2028. As of late October 2026 it is not yet law: the Council and Parliament have adopted their positions and are now negotiating (trilogues). It would mainly affect Spanish and other EU companies that import metal-intensive goods from outside the EU.
Regulatory context: what is being amended
CBAM is governed by Regulation (EU) 2023/956 and has been in its definitive phase since 1 January 2026. It currently covers iron and steel, cement, aluminium, fertilisers, electricity and hydrogen, with the simplifications introduced by Regulation (EU) 2025/2083. For a refresher on the current regime, see CBAM 2026: what the carbon tariff is and how it affects your business and our CBAM timeline for 2026 and 2027, covering authorised declarants and certificates.
The new proposal, COM(2025) 989 (procedure 2025/0419(COD)), amends that regulation with two aims:
- Extend the scope to downstream goods made largely of steel or aluminium.
- Close circumvention routes that have been detected or are foreseeable, such as moving the last production step to another country or sending only lower-emission output to the EU.
Which products would be covered
The final list is still open, and the three institutions start from very different figures:
- European Commission: around 180 products with a high risk of carbon leakage and an average steel or aluminium content of about 79%, according to the European Parliament Research Service. These include machinery, hardware and metal structures, vehicle components, household appliances, construction equipment and certain types of scrap.
- Council of the EU: around 200 products, plus an annual Commission review from 2028 to propose further additions.
- European Parliament: 457 products in its first-reading position, adding more fasteners, wire, springs and household articles.
One point matters for cost estimates: for downstream goods, CBAM would apply to the embedded emissions of the steel or aluminium they contain. In an example cited by several law firms, a car door made outside the EU would carry the emissions of its steel sheets, excluding those of assembling the door.
What the anti-circumvention measures change
The Commission's proposal introduces several tools, which the Council broadly accepts and Parliament tightens:
- Abusive practices: any conduct that avoids CBAM financial liability in whole or in part.
- Artificial supply chain changes: reorganising production solely to access lower default values would count as circumvention.
- High-risk categories: the Commission could flag higher-risk products or origins and ask customs and competent authorities for stronger controls and additional documentation.
- Scrap: pre-consumer steel and aluminium scrap would count as a precursor. Parliament wants to go further for aluminium.
- Resource shuffling: the Council and Parliament define it as sending a group's cleanest output to the EU and the most emission-intensive output to other markets, without real decarbonisation at origin.
- Distance sales and online platforms: Parliament proposes that platforms acting as importers take on authorised declarant status and that splitting shipments to stay below the threshold triggers retroactive liability.
In addition, according to Mayer Brown's analysis, Parliament proposes lowering the de minimis threshold for aluminium products from 50 to 5 net tonnes a year.
Where the legislative process stands
- 17 December 2025: the Commission publishes proposal COM(2025) 989.
- 12 June 2026: the Council adopts its general approach.
- 9 July 2026: Parliament's Environment Committee (ENVI) adopts its report.
- 15 September 2026: Parliament's plenary sets its negotiating position.
- 20 October 2026: first formal trilogue. According to specialist press, it ended without agreement, with four open issues: the aluminium threshold, scrap, online platforms and default values.
- 30 November 2026: next trilogue, according to schedules reported by specialist sources.
- Goal: the Council aims for an agreement before the end of 2026. The text must then be formally adopted and published in the Official Journal of the EU.
- 1 January 2028: application date in the Commission's proposal, subject to the final text.
Until the final regulation is published, the obligations in force are those of the current CBAM. You can follow the file on the Council's CBAM page.
What it means for importers in Spain and the EU
Many companies with no CBAM obligations today could have them from 2028: manufacturers buying metal components in Asia, machinery or hardware distributors, construction firms importing structures, or businesses selling appliances made outside the EU. In practice they would need to:
- Hold authorised declarant status if they exceed the de minimis threshold.
- Calculate the embedded emissions of the steel or aluminium in each product.
- Buy and surrender CBAM certificates for those emissions.
- Ask suppliers for data on the installations where the metal was produced, with a greater risk of checks if the origin is classed as high risk.
What to do now
- Check your purchases against the lists under negotiation. Compare the Combined Nomenclature (CN) codes of your imports with the annex to the proposal and the Council and Parliament additions.
- Estimate the mass of steel and aluminium you import inside downstream goods to see whether you would approach the threshold.
- Map your metal suppliers, down to the installation of origin wherever possible. This will let you use actual emissions in place of default values. We have a guide on how to collect data from your suppliers.
- Review contracts to add clauses on emissions data delivery and on sharing CBAM costs.
- Model a cost scenario using current certificate prices, and leave purchasing decisions until the final text is published.
- Follow the 30 November trilogue: the product list and the aluminium threshold are the points most likely to change your exposure.
Frequently asked questions
Is the CBAM extension already mandatory?
No. As of late October 2026 it is a proposal under negotiation between the Council and Parliament. It will only become mandatory once the regulation is published in the Official Journal of the EU.
When would it apply?
The Commission's proposal sets 1 January 2028. The final date will depend on the final agreement.
How many products would be covered?
Between around 180 (Commission) and 457 (Parliament). The final list will come out of the trilogues.
Would importers pay for the emissions of making the whole product?
Under the Commission's proposal, importers would pay for the embedded emissions of the steel or aluminium in the product. Assembly emissions would be excluded.
What is resource shuffling?
It means sending an industrial group's lowest-emission output to the EU and selling its most emission-intensive output elsewhere, without cutting emissions at origin. The Council and Parliament want to treat it as circumvention.
Preparing for the extension starts with well-organised supplier and product data. Manglai brings your sites', suppliers' and documents' environmental data together in one platform, reads invoices and PDF documents automatically with artificial intelligence and calculates your product footprint through life cycle assessment, with every data point traceable to its source document.


