Article 12 of Regulation (EU) 2025/40 on packaging and packaging waste (PPWR) requires packaging placed on the EU market to carry a harmonised, pictogram-based label showing its material composition to help consumers sort it. It will apply from 12 August 2028 or 24 months after the entry into force of the implementing act defining the label, whichever is later. The Commission did not adopt that act by its deadline (12 August 2026), so the obligation is expected to arrive after 2028. It affects every company placing packaging on the market, with exceptions such as transport packaging.
Legal basis: Articles 12 and 13 of the PPWR
Regulation (EU) 2025/40 has applied generally since 12 August 2026, but several of its obligations have their own dates. Labelling is one of them. Article 12 covers the labels packaging must carry and Article 13 the labels Member States must place on waste receptacles. The full text is available on EUR-Lex.
The aim is to replace the range of national and voluntary symbols with a single system across the EU, in which the label on the packaging matches the label on the bin where it should go.
Which labels the PPWR requires
Material composition label
This is the main obligation. Packaging will have to carry a label with information on its material composition, based on pictograms and easy to understand, including for persons with disabilities. Transport packaging is excluded, except e-commerce packaging. Compostable packaging will also have to state that it is compostable, that it is not suitable for home composting and that it must not be discarded in nature.
Packaging in deposit return systems
Packaging covered by a deposit return system will have to carry a clear marking indicating this. It may also carry a harmonised colour label.
Reusable packaging
Reusable packaging will have to state that it is reusable and carry a QR code or other data carrier with information on its reuse, the reuse system and collection points. This obligation will apply from 12 February 2029 or 30 months after the entry into force of the relevant implementing act, whichever is later.
Recycled and bio-based content
Showing the share of recycled content or bio-based plastic is voluntary. If a company chooses to do so, it will have to follow the harmonised specifications.
QR codes and digital labelling
- Voluntary complement: the composition label may be accompanied by a QR code or other data carrier with further information on how to sort each packaging component.
- Mandatory for reusable packaging: the QR code or equivalent data carrier is part of the reusable packaging label.
- Digital formats: the implementing act must also define digital labelling formats and a methodology for identifying material composition through digital marking technologies.
- Substances of concern: the regulation also provides for a digital marking to identify substances of concern in packaging, still to be developed.
Once harmonised labelling applies, labels and symbols likely to mislead consumers about how to sort packaging or whether it is recyclable will be prohibited. According to the Commission's PPWR guidance, Member States will also be unable to require additional national sorting labels, except for deposit return systems.
Labels on waste receptacles
Article 13 requires Member States to place harmonised labels on separate collection receptacles that are consistent with the packaging labels, so consumers can easily match the pictogram on the packaging with the right bin. This obligation falls on public authorities, and its timeline is also linked to the implementing act defining the labels.
Status of the implementing acts
The PPWR set 12 August 2026 as the deadline for the Commission to adopt the labelling implementing acts. That deadline was missed. The Commission registered the initiative in September 2026 and, according to the planning on its consultation portal as reported by specialist consultancies, adoption is expected in 2027. If the act enters into force in 2027, the composition label would become mandatory 24 months later, in 2029.
The final design of the label is not yet known. A standardised pictogram showing material composition is expected, in line with the Commission's earlier technical work.
Timeline
- 12 August 2026: the PPWR applies and the deadline for the labelling implementing acts expires without them being adopted.
- 2027 (expected): adoption of the implementing acts on harmonised labels.
- 12 August 2028 at the earliest: material composition label, marking of deposit return packaging and specifications for voluntary recycled content labels. The actual date will be the later of this date and 24 months after the implementing act enters into force.
- 12 February 2029 at the earliest: label and QR code for reusable packaging, or 30 months after the implementing act if that is later.
The regulation also provides a transitional period during which packaging manufactured or imported before the date of application can continue to be made available for a limited time.
What to do now
- List packaging and components: record for each product the materials of every component (body, cap, label, film), their weight and their supplier.
- Review current labels: identify the recycling symbols and environmental claims you use and whether they could be considered misleading.
- Plan design changes: build the new label into your normal redesign cycles to avoid urgent reprints.
- Prepare digital information: consider which data could be offered through a QR code and where it would be hosted.
- Align with extended producer responsibility: the composition data you need for the label is the same data you report under Royal Decree 1055/2022 and in your annual packaging declaration.
- Follow the implementing act: when the Commission publishes the draft, review the proposed design and deadlines.
Frequently asked questions
Do I need to change my packaging labels now?
No. The harmonised label will not be mandatory before 12 August 2028 and its design has not been defined yet. It makes sense to prepare your data and plan the change.
Is the QR code mandatory?
Only on reusable packaging. For all other packaging, the QR code is a voluntary complement to the physical label.
Which packaging is excluded from the composition label?
Transport packaging, except e-commerce packaging. Deposit return packaging carries its own marking.
Can I keep using the Green Dot or other national symbols?
Once harmonised labelling applies, symbols likely to mislead consumers about sorting or recyclability are prohibited. It is worth reviewing each symbol with your extended producer responsibility scheme.
Who places the labels on waste receptacles?
Member States, through the authorities responsible for waste collection.
Getting ready for harmonised labelling starts with well-documented composition data for every piece of packaging. At Manglai we bring the environmental data from your sites, suppliers and documents together in a single platform, use artificial intelligence to automatically extract information from invoices and PDF documents, and calculate product footprints through life cycle assessment, with every data point traceable back to its source document. Discover our product footprint solution.


